ASN logo
Accident
Last updated: 17 October 2017
Estado:Final
Fecha:martes 24 marzo 2015
Hora:15:07
Tipo:Silhouette image of generic C208 model; specific model in this crash may look slightly different
Cessna 208B Supervan 900
Operador:Markus Bastuck
Registración: N106BZ
Numéro de série: 208B-0106
Año de Construcción: 1988
Horas Totales de la Célula:11443
Motores: 1 Honeywell TPE331-12JR
Tripulación:Fatalidades: 0 / Ocupantes: 1
Pasajeros:Fatalidades: 0 / Ocupantes: 1
Total:Fatalidades: 0 / Ocupantes: 2
Daños en la Aeronave: Considerable
Consecuencias: Written off (damaged beyond repair)
Ubicación:Verdigris, OK (   Estados Unidos de América)
Fase: En ruta (ENR)
Naturaleza:Prueba
Aeropuerto de Salida:Tulsa International Airport, OK (TUL/KTUL), Estados Unidos de América
Aeropuerto de Llegada:Tulsa International Airport, OK (TUL/KTUL), Estados Unidos de América
Descripción:
The Cessna 208B, N106BZ, collided with terrain and trees during an off airport forced landing in Verdigris, Oklahoma. The force landing was a result of a loss of engine power during an en route climb. The pilot received minor injuries and the passenger was not injured. The airplane was substantially damaged. The aircraft was owned and operated by the pilot as post maintenance test flight. Visual meteorological conditions prevailed for the flight. The flight originated from the Tulsa International Airport, Oklahoma, at 15:00.
The airplane was equipped with a Honeywell TPE331 engine which had been installed about 9 flight hours prior to the accident. The pilot stated they were climbing to 11,000 feet when he noticed a decrease in engine torque with a steady exhaust gas temperature (EGT). As the torque started to drop even more, the EGT also began to decrease.
The pilot attempted to fly to a nearby airstrip, but was unable to maintain sufficient altitude. He then chose a field in which to land. Shortly after touching down, the airplane contacted trees, completely severing the left wing from the fuselage and partially severing the right wing from the fuselage.

Probable Cause:

PROBABLE CAUSE: "The fuel pump gear manufacturer’s allowance of set-up gears made from a nonconforming material to be put in the production inventory system, the installation of a nonconforming gear in the accident airplane’s production fuel pump, and the gear’s failure, which resulted in a loss of fuel flow to the engine and the subsequent loss of engine power."

Accident investigation:
cover
Investigating agency: NTSB
Status: Investigation completed
Duration: 209 days (7 months)
Accident number: CEN15LA180
Download report: Summary report

Fuentes:
» NewsOn6
» NTSB


Subsiguiente / acciones de seguridad

Honeywell issued 1

Show all AD's and Safety Recommendations

Fotos

Add your photo of this accident or aircraft

Video, social media

Map

This information is not presented as the Flight Safety Foundation or the Aviation Safety Network’s opinion as to the cause of the accident. It is preliminary and is based on the facts as they are known at this time.
languages: languages

Share