ASN Wikibase Occurrence # 197446
This information is added by users of ASN. Neither ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.
If you feel this information is incomplete or incorrect, you can
submit corrected information.
Date: | Friday 17 August 2007 |
Time: | c. 16:00 |
Type: | Airbus A330-243 |
Owner/operator: | Emirates |
Registration: | A6-EKY |
MSN: | 328 |
Year of manufacture: | 2000 |
Engine model: | Rolls-Royce Trent 772-B60 |
Fatalities: | Fatalities: 0 / Occupants: 259 |
Aircraft damage: | Minor |
Category: | Serious incident |
Location: | München-Franz Josef Strauss Airport (MUC/EDDM) -
Germany
|
Phase: | Taxi |
Nature: | Passenger - Scheduled |
Departure airport: | München-Franz Josef Strauss Airport (MUC/EDDM) |
Destination airport: | |
Investigating agency: | BFU |
Confidence Rating: | Accident investigation report completed and information captured |
Narrative:The aircraft, an Airbus A330-243, was entering the taxiway via Sierra 6 when the bogie beam of the right main landing gear broke in the area behind the shock absorber.
Conclusions:
The starting point for the fracture was a hole corrosion. From there, the tear of intercrystalline spread out, until the ductile violence broke. The crack output and the crack propagation were caused by stress corrosion cracking.
The local loss of the corrosion protection layer was caused by the weakening and detachment of the paint and by the coating of the cadmium.
On 21 December 2007 EASA issued AD 2007-0314, requiring a one-time inspection on all MLG Bogie Beams (except Enhanced MLG Bogie Beams).
This AD was superseded by EASA AD 2008-0093, dated 20 May 2008. This AD reduced the inspection threshold from 6 to 4.5 years due to significant findings on the inspected aircraft.
This AD was in turn superseded by EASA AD 2011-0141 on 25 July 2011, requiring a.o. modification of the left-hand (LH) and RH MLG bogie beam to improve the coat paint application method, and the application of corrosion protection.
This AD was in turn superseded by EASA AD 2012-0015 on 23 January 2012, introducing repetitive inspections of the
MLG bogie beams, which allows extension of the compliance time for the MLG bogie beam modification from 15 years to 21 years. Modification of a MLG bogie beam constitutes terminating action for the repetitive inspections for that MLG bogie beam.
Accident investigation:
|
| |
Investigating agency: | BFU |
Report number: | |
Status: | Investigation completed |
Duration: | 9 years and 11 months |
Download report: | Final report |
|
Sources:
1.
https://ad.easa.europa.eu/ad/2007-0314R1 2.
https://ad.easa.europa.eu/ad/2011-0141 3.
https://ad.easa.europa.eu/ad/2013-0267R1 Revision history:
Date/time | Contributor | Updates |
12-Aug-2017 16:46 |
harro |
Added |
12-Aug-2017 17:05 |
harro |
Updated [Source, Narrative] |
The Aviation Safety Network is an exclusive service provided by:
CONNECT WITH US:
©2024 Flight Safety Foundation