ASN logo
Last updated: 27 November 2021
Estado:Final
Fecha:domingo 21 diciembre 2008
Hora:ca 01:00
Tipo:Silhouette image of generic FA20 model; specific model in this crash may look slightly different
Dassault Falcon 20C
Operador:Ameristar Jet Charter
Registración: N165TW
Numéro de série: 65
Año de Construcción: 1966
Horas Totales de la Célula:16360
Motores: 2 General Electric CF700-2D2
Tripulación:Fatalidades: 0 / Ocupantes: 2
Pasajeros:Fatalidades: 0 / Ocupantes: 0
Total:Fatalidades: 0 / Ocupantes: 2
Daños en la Aeronave: Anulado
Consecuencias: Written off (damaged beyond repair)
Ubicación:Chautauqua County-Jamestown Airport, NY (JHW) (   Estados Unidos de América)
Fase: Aterrizaje (LDG)
Naturaleza:Carga
Aeropuerto de Salida:Tulsa International Airport, OK (TUL/KTUL), Estados Unidos de América
Aeropuerto de Llegada:Chautauqua County-Jamestown Airport, NY (JHW/KJHW), Estados Unidos de América
Descripción:
The Dassault Falcon 20C, N165TW, was substantially damaged following a runway excursion after landing on runway 25 at the Chautauqua County-Jamestown Airport (JHW), New York. Instrument meteorological conditions prevailed at the time, and an instrument flight rules flight plan was filed for a cargo flight from Tulsa International Airport (TUL), Oklahoma.
The co-pilot was performing a nighttime approach and landing to runway 25. No runway condition reports were received by the flight crew while airborne, and a NOTAM was in effect, stating, "thin loose snow over patchy thin ice." After landing, the co-pilot called out that the airplane was sliding and the wheel brakes were ineffective. The captain took the controls, activated the air brakes, and instructed the co-pilot to deploy the drag chute. The crew could not stop the airplane in the remaining runway distance and the airplane overran the runway by approximately 100 feet. After departing the runway end, the landing gear contacted a snow berm that was the result of earlier plowing. The captain turned the airplane around and taxied to the ramp. Subsequent inspection of the airplane revealed a fractured nose gear strut and buckling of the fuselage. The spring-loaded drag chute extractor cap activated, but the parachute remained in its tail cone container. Both flight crewmembers reported that the runway was icy at the time of the accident and braking action was "nil."
The airport manager reported that when the airplane landed, no airport staff were on duty and had not been for several hours. He also reported that when the airport staff left for the evening, the runway conditions were adequate. The runway had been plowed and sanded approximately 20 hours prior to the accident, sanded two more times during the day, and no measurable precipitation was recorded within that time frame. The reason that the drag chute failed to deploy was not determined.

Probable Cause:

PROBABLE CAUSE: "The inability to stop the airplane on the remaining runway because of icy runway conditions. A factor was the failure of the drag chute to properly deploy."

Accident investigation:
cover
Investigating agency: NTSB
Status: Investigation completed
Duration: 1 year
Accident number: ERA09LA282
Download report: Summary report

Fuentes:
» NTSB


Fotos

Add your photo of this accident or aircraft

Map
This map shows the airport of departure and the intended destination of the flight. The line between the airports does not display the exact flight path.
Distance from Tulsa International Airport, OK to Chautauqua County-Jamestown Airport, NY as the crow flies is 1565 km (978 miles).

This information is not presented as the Flight Safety Foundation or the Aviation Safety Network’s opinion as to the cause of the accident. It is preliminary and is based on the facts as they are known at this time.
languages: languages

Share