ASN logo
Last updated: 9 December 2021
Status:Schlussbericht
Datum:Mittwoch 16 September 2009
Zeit:12:15
Flugzeugtyp:Silhouette image of generic BE20 model; specific model in this crash may look slightly different
Beechcraft B200 King Air
Fluggesellschaft:Henry Broadcasting Nevada Inc
Kennzeichen: N726CB
Werknummer: BB-1750
Baujahr: 2001
Betriebsstunden:1229
Triebwerk: 2 Pratt & Whitney Canada PT6A-42
Besatzung:Todesopfer: 0 / Insassen: 1
Fluggäste:Todesopfer: 0 / Insassen: 0
Gesamt:Todesopfer: 0 / Insassen: 1
Sachschaden: Zerstört
Konsequenzen: Written off (damaged beyond repair)
Unfallort:Hayward Executive Airport, CA (HWD) (   USA)
Flugphase: Anfangssteigflug (ICL)
Betriebsart:Test
Flug von:Hayward Executive Airport, CA (HWD/KHWD), USA
Flug nach:Hayward Executive Airport, CA (HWD/KHWD), USA
Unfallbericht:
A Beechcraft B200 King Air, N726CB, sustained substantial damage after impacting terrain while maneuvering during initial climb at the Hayward Executive Airport, CA (HWD). The commercial pilot, the sole occupant, was not injured. Visual meteorological conditions prevailed for the local flight.
The airplane just had undergone a routine maintenance and this was planned to be the first flight after the inspection. During the initial climb, the pilot observed that the airplane was drifting to the left. The pilot attempted to counteract the drift by application of right aileron and right rudder, but the airplane continued to the left. The pilot reported that, despite having both hands on the control yoke, he could not maintain directional control and the airplane collided into a building. The airplane subsequently came to rest on railroad tracks adjacent to the airport perimeter.
A post accident examination revealed that the elevator trim wheel was located in the 9-degree NOSE UP position; normal takeoff range setting is between 2 and 3 degrees NOSE UP. The rudder trim control knob was found in the full left position and the right propeller lever was found about one-half inch forward of the FEATHER position; these control inputs both resulted in the airplane yawing to the left.

The pilot did not adequately follow the airplane manufacturer's checklist during the preflight, taxi, and before takeoff, which resulted in the airplane not being configured correctly for takeoff. This incorrect configuration led to the loss of directional control immediately after rotation. A post accident examination of the airframe, engines, and propellers revealed no anomalies that would have precluded normal operation.

Probable Cause:

PROBABLE CAUSE: "The pilot's failure to maintain directional control after takeoff. Contributing to the accident was the pilot's inadequate preflight and failure to follow the airplane manufacturer's checklist to ensure that the rudder trim control and right propeller control lever were positioned correctly."

Accident investigation:
cover
Investigating agency: NTSB
Status: Investigation completed
Duration: 1 year and 6 months
Accident number: WPR09LA451
Download report: Summary report

Informationsquelle:
» NTSB


Fotos

photo of Beechcraft-B200-King-Air-N726CB
accident date: 16-09-2009
type: Beechcraft B200 King Air
registration: N726CB
photo of Beechcraft-B200-King-Air-N726CB
 

Map

This information is not presented as the Flight Safety Foundation or the Aviation Safety Network’s opinion as to the cause of the accident. It is preliminary and is based on the facts as they are known at this time.
languages: languages

Share