ASN logo
Last updated: 19 September 2021
Estado:
Fecha:jueves 27 febrero 2014
Hora:16:45
Tipo:Silhouette image of generic B733 model; specific model in this crash may look slightly different
Boeing 737-36Q (WL)
Operador:Canadian North
Registración: C-GICN
Numéro de série: 29405/3047
Año de Construcción: 1998-06-16 (15 years 9 months)
Motores: 2 CFMI CFM56-3C1
Tripulación:Fatalidades: 0 / Ocupantes:
Pasajeros:Fatalidades: 0 / Ocupantes:
Total:Fatalidades: 0 / Ocupantes: 97
Daños en la Aeronave: Considerable
Consecuencias: Repaired
Ubicación:Winnipeg-James Armstrong Richardson International Airport, MB (YWG) (   Canadá)
Fase: Despegue (TOF)
Naturaleza:Vuelo Doméstico Programado
Aeropuerto de Salida:Winnipeg-James Armstrong Richardson International Airport, MB (YWG/CYWG), Canadá
Aeropuerto de Llegada:Fort Mackay/Horizon Airport, AB (HZP/CYNR), Canadá
Número de Vuelo:5T1527
Descripción:
A Canadian North Boeing 737-36Q, C-GICN, flight MPE1527 was on takeoff roll on runway 18 at Winnipeg Airport, Canada. At approximately 100 knots there were noises that indicated that a tire had blown. The crew initiated a rejected takeoff. The aircraft came to a controlled stop on the runway. The passengers were evacuated without injury. Inspection revealed that both left-main tires had blown. Damage was sustained to both wheels, landing gear door, lower wing skin, flap trailing edge and hydraulic system. Runway 18 was NOTAMed closed for approximately 3 hours until the aircraft was removed from the runway.

Fuentes:
» TSB


Fotos

Add your photo of this accident or aircraft

Map
This map shows the airport of departure and the intended destination of the flight. The line between the airports does not display the exact flight path.
Distance from Winnipeg-James Armstrong Richardson International Airport, MB to Fort Mackay/Horizon Airport, AB as the crow flies is 1251 km (782 miles).

This information is not presented as the Flight Safety Foundation or the Aviation Safety Network’s opinion as to the cause of the accident. It is preliminary and is based on the facts as they are known at this time.
languages: languages

Share